Table of Contents
Advertisement
■
How to initialize the tire pressure warning system
RX350
Park the vehicle in a safe place and turn the "ENGINE START
STEP
1
STOP" switch off.
While the vehicle is moving, initialization is not performed.
Adjust the tire inflation pressure to the specified cold tire inflation
STEP
2
pressure level. (P. 957)
Make sure to adjust the tire pressure to the specified cold tire inflation
pressure level. The tire pressure warning system will operate based on
this pressure level.
Turn the "ENGINE START STOP" switch to IGNITION ON
STEP
3
mode.
STEP
4
Wait for a few minutes in "ENGINE START STOP" switch to on,
STEP
5
and then turn the "ENGINE START STOP" switch off.
4-3. Do-it-yourself maintenance
Press and hold the tire pressure
warning reset switch until the tire
pressure warning light blinks
slowly 3 times.
4
775
Advertisement
Table of Contents
