Table of Contents
Advertisement
Erasing the entire HomeLink
Before programming
■
Install a new battery in the remote control transmitter.
●
The battery side of the remote control transmitter must be pointed away from
●
the HomeLink
When programming
■
Depending on radio wave conditions, the direction the remote control transmitter is
pointed and the remaining charge of the transmitter's batteries, there are cases
when programming may be difficult.
memory (all three programs)
button.
3-7. Other interior features
Press and hold the 2 outside but-
tons for 10 seconds until the indi-
cator light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink
memory.
3
709
Advertisement
Table of Contents
