Table of Contents
Advertisement
Rear view monitor system camera
■
Flicker effect
■
When the camera is used under fluorescent lights, sodium lights, mercury lights
etc., the lights and the illuminated areas may appear to flicker.
Smear effect
■
2-4. Using other driving systems
In the following cases, it may become diffi-
cult to see the images on the screen, even
when the system is functioning correctly:
The vehicle is in a dark area, such as at
●
night.
The temperature near the lens is
●
extremely high or low.
Water droplets are on the camera lens
●
or humidity is high, such as when it
rains.
Foreign matter, such as snow or mud,
●
adheres to the camera lens.
The sun or headlights are shining
●
directly into the camera lens.
A bright object such as a white wall is
●
reflected in the mirror surface over the
monitor.
The camera has scratches or dirt on it.
●
If a bright light, such as sunlight reflected
off the vehicle body, is picked up by the
camera, a smear effect* characteristic to
the camera may occur.
*: Smear effect A phenomenon that
occurs when a bright light is picked up by
the camera; when transmitted by the
camera, the light source appears to have
a vertical streak above and below it.
2
331
Advertisement
Table of Contents
