Dynamic radar cruise control can be set when
■
The shift lever is in D or range 4 or higher of S has been selected.
●
Vehicle speed is above approximately 30 mph (50 km/h).
●
Accelerating after setting the vehicle speed
■
The vehicle can accelerate normally. After acceleration, the set speed resumes.
However, during vehicle-to-vehicle distance control mode, the vehicle speed may
decrease below the set speed in order to maintain the distance to the vehicle
ahead.
2-4. Using other driving systems
RX350: If the "ENGINE START
STOP" switch is turned off and
then turned to IGNITION ON
mode again, the vehicle will auto-
matically return to vehicle-to-vehi-
cle distance control mode.
RX450h: If the "POWER" switch
is turned off and then turned to
ON mode again, the vehicle will
automatically return to vehicle-to-
vehicle distance control mode.
Adjusting the speed setting:
P. 297
Canceling and resuming the speed
setting: P. 299
2
303