Table of Contents
Advertisement
2-1. Driving procedures
Selecting gears in the M position
To enter M mode, shift the shift lever to the M position. Gears can then be
selected by operating the shift lever or paddle shift switches, allowing you
to drive in the gear of your choosing.
When in the M position, the gear will not change unless the shift lever or
paddle shift switches are operated.
However, even when in the M position, the gears will be automatically
changed in the following situations:
● When vehicle speed drops (downshift only).
● When the automatic transmission fluid or engine coolant temperature
is low.
● When engine speed is higher than necessary. (upshift only)
232
Upshifting
Downshifting
The gear changes once every time
the shift lever or paddle shift switch
is operated.
Advertisement
Table of Contents
