Lexus 2012 RX450h Owner's Manual page 223

Hide thumbs Also See for 2012 RX450h:

Table of Contents

Changing shift ranges in S mode

To enter S mode, shift the shift lever to the S position. The shift range can

then be selected by operating the "-" and "+" paddle shift switches (if

equipped) or the shift lever. Changing the shift range allows restriction of

the upper limit of the gears to be used, preventing unnecessary upshifting

and enabling the level of engine braking force to be selected.

The initial shift range in S mode is set automatically to "5" or "4" accord-

ing to vehicle speed. However, the initial shift range may be set to "3" if

AI-SHIFT has operated while the shift lever was in the D position.

Shift ranges and their functions

● Automatically selecting gears between 1 and 6 according to vehicle

speed and driving conditions. But the gear is limited according to

selected shift range.

● You can choose from 6 levels of engine braking force.

● A lower shift range will provide greater engine braking force than a

higher shift range, and the engine speed will also increase.

2-1. Driving procedures

Downshifting