Honda 08A23-2E1-010 Installation Instructions Manual page 19

73. Measure and cut the EPT sealer as shown.
EPT SEALER
(Cut off the
marked area.)
EPT SEALER
74. Clean the player panel with isopropyl alcohol
where the EPT sealers will be attached. Attach
the player panel with the EPT sealer, and cut off
the marked area from the player panel.
75. Attach the two grommet screws to the player
panel.
GROMMET
SCREW
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
76. Insert the player panel clips into latches, and
attach the player panel to the instrument panel
with the two self-tapping screws removed in step
PLAYER
13. Remove the masking tape.
PANEL
8 mm
SELF TAPPING
SCREW
(reused )
8 mm
2612010T
PLAYER
PANEL
2306131T
AII 24046 (0208)
LATCH
CLIP
PLAYER
PANEL
2306141T
19 of 20