Advertisement
63. On the right of the dashboard opening, unplug the
vehicle antenna leads and plug into the FM
modulator antenna lead. Plug the FM modulator
antenna lead into the vehicle antenna lead.
DASHBOARD
OPENING
PLAYER BASE-BRACKET
FM
MODULATOR
ANTENNA
LEAD
ANTENNA
LEADS
VEHICLE
ANTENNA
WIRE TIE
LEAD
WITH CLIP
VEHICLE HARNESS
64. Wrap the FM modulator antenna lead and vehicle
harness you removed with one wire tie with clip,
and push the wire tie with clip into the hole in the
player base-bracket.
65. Install the left and right player subbrackets into
the holes in vehicle frame, then install the two 6
mm flange nuts while pushing the player sub-
bracket upward.
VEHICLE FRAME
LEFT PLAYER
SUBBRACKET
RIGHT PLAYER
SUBBRACKET
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
VEHICLE
ANTENNA
LEAD
FM
MODULATOR
ANTENNA
LEAD
2326391T
6 mm
FLANGE NUT
VEHICLE
FRAME
2306021T
66. Align the end of the i -VES terminal with the end
of the DIN harness terminal as shown, and loop
the harnesses, and secure them with two wire
ties.
i -VES
HARNESS
67. To protect the center panel, attach the masking
tape to the center panel in the area shown.
AII 24046 (0208)
WIRE TIE
VEHICLE
HARNESS
WIRE TIE
DIN HARNESS
CENTER PANEL
MASKING
TAPE
2506010T
17 of 20
Advertisement
