Honda 08A23-2E1-010 Installation Instructions Manual page 11

32. Remove the two caps from the left rear grab rail,
and remove the grab rail (two bolts).
CAP
LEFT REAR
GRAB RAIL
Routing the i -VES Harness/Monitor Harness and
Installing the Monitor Console
33. Route the 90° end of the i -VES harness from the
left front pillar trim opening to the dashboard
lower cover opening.
LEFT FRONT
PILLAR TRIM
OPENING
DASHBOARD
LOWER COVER
OPENING
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
BOLT
2326100T
i -VES HARNESS
i -VES
HARNESS
90°
TERMINAL
END
2326202T
34. Continue routing the 90° end of the i -VES harness
from the dashboard lower cover opening to the
pocket opening on the driver's seat side.
DASHBOARD LOWER
COVER OPENING
35. Remove the sunvisor holders. Using a flat-tip
screwdriver, push the hook, and turn the holder
90°, then pull it out.
SUNVISOR
HOLDERS (2)
AII 24046 (0208)
POCKET
OPENING
90°
TERMINAL
END
i -VES
HARNESS
2326192T
FLAT-TIP
SCREWDRIVER
2326210T
11 of 20