Final Work - Webasto Thermo Top E Installation Instructions Manual

Final Work

WARNING!
Reassemble the disassembled components in reverse order.
Check all hoses, hose, spring and Caillau clamps, as well as all electrical connections for firm seating.
Secure all loose cables using cable ties.
Only use manufacturer-approved coolant.
Spray the heater unit components with anti-corrosion wax (Tectyl 100K, Order No. 111329).
- Connect the battery
- Start the engine, bleed the coolant circuit according to the vehicle manufacturer's instructions and
top up coolant
- Set the digital timer.
- Make settings according to the "Operating Instructions for End Customer"
- Check the proper operation of the additional heater, see the operating instructions/installation
instructions.
- Attach the "Switch off additional heater before refueling" sticker to the left-hand B-pillar.
1 2
1 Underride protection
2 Drill out existing hole to 42 mm dia., red (rt)
rubber isolator with groove
42
Webasto AG
Postfach 80 - 82132 Stockdorf, Germany - Hotline +49-
(0)1805-932278
Hotfax +49-(0)395-5592-353 - http://www.webasto.de
Printed in Germany
Honda Civic
Feel the drive
03/07Printed by: Steffen
i
Mounting
rubber
isolator