Table of Contents
Advertisement
1. Gather the following items as shown below.
•
Spinner (supplied)
•
Prop (not supplied)
•
Drill jig guide (not supplied)
•
Alignment bolt (not supplied)
•
Wood spacer as shown below (not supplied)
2. With spinner cone screwed to back plate mark
the location of the prop cutouts onto the back
plate as shown below.
Spinner and Prop Installation
71
3. Remove the spinner back plate from the nose
cone as shown. Make certain holes are aligned
correctly.
4. Place a propeller drill jig onto the back side of
the back plate as shown.
Note: Install the drill jig onto the back of the spin-
ner back plate.
Hide quick links:
Advertisement
Table of Contents
