Table of Contents
Advertisement
5. Tape template to fuse bottom transfer alignment
marks onto template. Use masking tape to se-
curely hold the template to the fuse.
6. Trace around the cylinder head of the motor be-
ing careful to keep the template in the same loca-
tion.
Note: Mark Cowl Side on template for easy
reference when placing template on cowling
7. Using a hobby knife cut out template for cylin-
der head.
8. Reattach the template to fuse and check to see if
the template lines up correctly and cut out for
cylinder is correct. It may be necessary to make
small adjustments to the cut out at this time.
67
Hide quick links:
Advertisement
Table of Contents
