Table of Contents
Advertisement
13. Check and make sure that the prop does not
come in contact with the spinner. If it does use a
dremel tool to remove the material around the
opening of the nose cone.
14. Remove the nose cone as shown below. Ensure
that the drill guide has not moved from its origi-
nal position.
15. Using a drill press drill through the drill jig
guide and back plate and into the prop. This will
keep the prop aligned with the back plate.
16. Make a reference mark on both the prop and
back plate to help realign the prop.
74
Hide quick links:
Advertisement
Table of Contents
