Invacare Azalea Assist Service Manual page 29

Components
Castors
All fasteners for wear and
tightness
Accessories
Lubricate all removable parts with a dry teflon based spray, e.g "Viso 900–B5".
All fasteners for wear and
tightness
Headrest
Neckrest
Trunk support "Multi
functional"
Abduction cushion
Table tray
1580313-B
•
Detach the castors and clean the castor forks.
•
Remove any dirt or hair from the castors.
•
Attach the castors again and check that the castors turn freely.
•
If the castors are air filled, check the pressure — recommended air pressure for low profile tires is
8" / 4.0 bar.
•
If the castors are solid, check the tires for cracks. If the tires are dry and filled with cracks, they
need to be replaced.
Bolts and other fasteners can come loose due to constant use:
1. Check that the fasteners are tight on the castor forks, footrest, seat, side rests, backrest, handles etc.
2. Tighten any loose bolts or screws.
Bolts and other fasteners can come loose due to constant use:
1. Check that the fasteners are tight on the castor forks, footrest, seat, side rests, backrest, handles etc.
2. Tighten any loose bolts or screws.
•
Check that the side- and angle adjustment for the "wings" works properly.
•
Check that the angle adjustment works and that there is a memory function.
•
Check that the angle adjustment works and that there is a memory function.
•
Check that the angle adjustment works properly and that there is a memory function.
•
Check that the depth adjustment works.
•
When re-mounting the table tray, try to find the thread manually before fastening the screws with
tools. This spare the threading.
Maintenance
29