Table of Contents
Advertisement
5 3
TAI L G E A R CA SE INST A LL A T I ON 1
Setscrew, 3 x 6mm (2pcs)
Setscrew, 4 x 4mm (2pcs)
Setscrew, 4 x 6mm (4pcs)
Setscrew, 3 x 6mm
Bevel Gear Pin
Button Head Bolt, 3 x 6mm (4pcs)
Poly Slider, 6 x 9.5 x 0.13mm
(for gear mesh adjustment)
Washer, 6 x 10 x 0.5mm
Tail Output Shaft Stopper
Complete Assembly
Button Head Bolt, 3 x 6mm (4pcs)
Button Head Bolt, 3 x 8mm (2pcs)
Bevel Gear Pin (2pcs)
Bevel Gear T22 Output
Tail Output Shaft
Tail Gear Case Plate A
Setscrew,
4 x 4mm (2pcs)
Tail Gear Case Cross Member
Tail Gear Case Plate B
Note the proper direction of
Tail Pitch Base and Tail Gear Case Plate.
Washer, 6 x 10 x 0.5mm (1pc)
Poly Slider, 6 x 9.5 x 0.13mm (1pc)
Bevel Gear T22 Input
Setscrew, 3 x 6mm
Secure so that the Setscrews
engage in the D-shape recess.
Setscrew, 4 x 6mm (4pcs)
Tail Gear Case Assembly
Tail Pitch Base
Button Head Bolt, 3 x 8mm (2pcs)
Note: Finally tighten the Tail Output
Shaft Stopper setscrews after assembly
is complete to remove and allow free
36
Bevel Gear Shaft
Bevel Gear Pin
Tail Drive Joint
play of the output shaft.
Hide quick links:
Advertisement
Table of Contents
