Printer Color Balance Adjustment Target Setup - Sharp MX-1810U Service Manual

1) Enter the SIM 63-8 mode.
SET 1B Printer color balance adjustment target setup
• Color balance target for the printer color balance adjustment
Type
A Factory color There are three kinds of the color balance targets, and each of them is specified according to the machine design. Use SIM 67-26 to
balance (gamma) select one of them as the factory target. The default setting (factory setting) is the color balance (DEF1) which emphasizes color
target reproduction.
B Service color This target is used when the user requests to customize the color balance to user's desired level. In advance, the user's unique color
balance (gamma) balance must be registered as the service color balance target. The above registration (setting) is made by the serviceman with SIM
target 67-25 to adjust the color balance and with SIM 67-27 to register it.
This color balance target is used when the user executes the color balance adjustment. When, therefore, the service color balance
target is changed, the color balance target of the user's color balance adjustment is also changed. When, however, SIM 67-28 is
executed, the color balance is set to the factory color balance target set with SIM 67-26. The default setting (factory setting) of the color
balance is same as the factory color balance target. (Emphasized on color reproduction (DEF1))
If the user does not request for customizing the color balance, be sure to use SIM 67-28 to set the color balance to the factory color
balance target.
C User color balance Same color balance as the service color balance (gamma) target When the service color balance target is changed, this color balance
(gamma) target target is also changed accordingly.
• Relationship between the factory target and the service target and the color balance target for the user color balance adjustment in the
printer color balance adjustment (Automatic adjustment) (SIM 46-74/76-24)
Use SIM 67-26 to select one of the three
kinds of color balance targets.
Factory color balance
target (DEF1)
Factory color balance
target (DEF2)
Factory color balance
target (DEF3)
Color balance target in the printer color balance
automatic adjustment (SIM 67-24)
=
Factory color balance
target (DEF1)
Factory color balance
=
target (one of DEF1 - 3)
Color balance target in the user color balance adjustment
Color balance target for
=
the user color balance
adjustment
MX-3610N ADJUSTMENTS AND SETTINGS 4 – 35
2) Press [EXECUTE] key.
3) Press [YES] key.
The service color balance target and the color balance target for
the user color balance adjustment are set to the same color bal-
ance as the factory color balance target.
Descriptions
Service color balance
Factory setting
target
Use SIM 67-25 to adjust the optional color
Service color balance
target (Unique)
balance, and use SIM 67-27 to register it.
Execute SIM 67-28.
Service color balance
(The service color balance target is
target
the same as the factory color balance
target.)
Service color balance
target