Sharp MX-1810U Service Manual page 78

Job No.
ADJ 10/ Color balance and density
SET1 adjustment
ADJ 11 Paper size sensor adjustment
ADJ 12 Document size detection
adjustment
ADJ 13 Touch panel coordinate setting
ADJ 14 Fusing paper guide position adjustment
ADJ 15 Print image position, image
magnification ratio, void area,
off-center adjustment (Print
engine) (Manual adjustment)
ADJ 16 Scan image magnification ratio
adjustment (Manual adjustment)
ADJ 17 Scan image off-center
adjustment (Manual adjustment)
ADJ 18 Copy image position, image loss
adjustment (Manual adjustment)
ADJ 19 Finisher and punch unit adjustments (alignment, punch hole position, staple position)
Adjustment item list
10D Copy / Image send / FAX
image quality adjustment
(Individual adjustment)
10E Printer image quality
adjustment (Basic adjustment)
10F Printer image quality
adjustment
(Individual adjustment)
11A Manual paper feed tray paper size (width) sensor adjustment
11B RSPF paper feed tray document size (width) sensor adjustment
12A Document size sensor detection point adjustment
12B Adjust the sensitivity of the original size sensor
15A Print image magnification ratio adjustment (main scanning direction) (Print engine)
(Manual adjustment)
15B Print image print area adjustment (Print engine) (Manual adjustment)
15C Print image off-center adjustment (Print engine) (Manual adjustment)
16A Scan image magnification ratio adjustment (main scanning direction) (Manual adjustment)
(Document table mode)
16B Scan image magnification ratio adjustment (sub scanning direction) (Manual adjustment)
(Document table mode)
16C Scan image magnification ratio adjustment (main scanning direction) (Manual adjustment)
(RSPF mode)
16D Scan image magnification ratio adjustment (sub scanning direction) (Manual adjustment)
(RSPF mode)
17A Scan image off-center adjustment (Manual adjustment) (Document table mode)
17B Scan image off-center adjustment (Manual adjustment) (RSPF mode)
18A Copy image position, image loss, void area adjustment (Manual adjustment)
(Document table mode)
18B Image scanning position adjustment (Manual adjustment) (RSPF mode)
18C Copy image position, image loss, void area adjustment (Manual adjustment) (RSPF mode)
MX-3610N ADJUSTMENTS AND SETTINGS 4 – 2
10D Document low density image density reproduction
(6) adjustment in the automatic monochrome (Copy/
Scan/FAX) mode (No need to adjust normally)
(Background density adjustment in the scanning
section)
10D Copy/Scan low density image density adjustment
(7) (for each mode) (No need to adjust normally)
10D Color copy, text, line image reproduction
(8) adjustment (edge gamma, density adjustment)
(Text, Map mode) (No need to adjust normally)
10D Monochrome (Copy/Scan/FAX) mode color
(9) document reproduction adjustment
(No need to adjust normally)
10D Color copy mode dark area gradation (black
(10) component quantity) adjustment
(No need to adjust normally)
10D Color (Copy/Scan) mode sharpness adjustment
(11) (No need to adjust normally)
10D Copy high density image density reproduction
(12) setting
(Normally unnecessary to the setting change)
10D Copy color balance adjustment (Single color copy
(13) mode) (No need to adjust normally)
10D RSPF mode (Copy/Scan/FAX) density adjustment
(14) (No need to adjust normally)
10D Automatic color balance adjustment by the user
(15) (Copy color balance automatic adjustment
ENABLE setting and adjustment)
10D Copy gamma, color balance adjustment for each
(16) dither (Automatic adjustment)
10D Dropout color adjustment (Normally not required.)
(17) (26cpm/36cpm/31cpm(A) machine)
10D Watermark adjustment (Normally not required)
(18) (26cpm/36cpm/31cpm(A) machine)
10E Printer color balance adjustment
(1) (Automatic adjustment)
10E Printer color balance adjustment
(2) (Manual adjustment)
10F Printer density adjustment (Low density section
(1) density adjustment) (No need to adjust normally)
10F Printer high density image density reproduction
(2) setting (Supporting the high density section tone
gap) (No need to adjust normally)
10F Printer gamma adjustment for each dither
(3) (Automatic adjustment) (No need to adjust
normally) (Except for GDI printers)
10F Automatic color balance adjustment by the user
(4) (Printer color balance automatic adjustment
ENABLE setting and adjustment)
(Normally unnecessary to the setting change)
Simulation
46-32
46-63
46-27
46-37
46-38
46-60
46-23
46-25
46-9
26-53
46-54
46-55
46-66
67-24
67-25
67-36
67-34
67-54
26-53
40-2
53-6
41-1
41-2
65-1
50-10
50-10/50/1
50-10
48-1
48-1/48-5
48-1
48-1
50-12
50-12/50-6
50-1
53-8
50-6
3-10