Connection Of The Hydraulic Hoses To The Steering Cylinder - Mercury 200 VERADO Installation Manual

4. Connect the high pressure hydraulic hose from the steering helm to the pump as
shown.
b

Connection of the Hydraulic Hoses to the Steering Cylinder

1. Route the hydraulic hoses to the outboard steering cylinder. Bulkhead fittings are
available if an opening does not exist in the engine well.
NOTE: The 90° hose fittings on the steering cylinder can be rotated to align with hose
routing. Straight hose fittings (22-892519) are also available.
90-10238051
a
a - O-ring
b
a
a - Bulkhead fitting - bulkhead thickness up to 1.9 cm (0.75 in.) (22-892517)
b - Bulkhead fitting - bulkhead thickness up to 7.62 cm (3 in.) (22-892518)
200/225/250/275 VERADO 4-STROKE
ob01463
b - High pressure hydraulic steering
hose
ob01464
Page 15 / 51