Steering Control Connections - Mercury GO BOLDLY 25 EFI Operation, Maintenance And Installation Manual

Description
Captive screw (7)
9. Use cable ties to secure the throttle, shift, and battery cables to the boat
harness, to prevent contact with the steering components.

Steering Control Connections

STEERING BRACKET, STEERING CABLE INSTALLATION
1. Install the steering bracket with two washers and two 30 x 80 mm bolts.
Tighten the steering bracket bolts to the specified torque.
Description
Steering bracket bolt
2. Lubricate entire steering cable end with 2‑4‑C with PTFE.
Description
2-4-C with PTFE
3. Install the steering cable seal onto the end of the tilt tube.
eng
INSTALLATION
Where Used
Steering cable end
39
Nm lb‑in.
8.5 75
74478
Nm lb‑in.
30 –
10261
lb‑ft
–
lb‑ft
22
Part No.
92-802859A 1