Connection Of The Hydraulic Hoses To The Power Steering Pump - Mercury 200 VERADO Installation Manual

200/225/250/275 VERADO 4-STROKE
Helm Fitting ID Mark

Connection of the Hydraulic Hoses to the Power Steering Pump

1. Remove and discard the yellow protector cap from end of tank low pressure fitting.
2. Connect the low pressure hydraulic hose from the steering helm to the low pressure
fitting on the pump reservoir as shown. Fasten hose to fitting with constant tension
spring clamp.
b
3. Ensure that O-ring seal is on end of hose.
Page 14 / 51
Hose ID Mark
R R-STAR
L L-PORT
a
c
a - Yellow protector cap (remove and discard)
b - Low pressure hydraulic hose from steering helm
c - Clamp
Description
Hose connects to starboard side of steering cylinder
Hose connects to port side of steering cylinder
ob01462
90-10238051