Mercury 200 VERADO Installation Manual page 9

To avoid loss of outboard, ensure that a minimum of two full threads of bolt extend
beyond locknut after tightening locknut. Ensure mounting nut is tightened against
transom, not the shank of the mounting bolt.
Part Number
10-67755003
11-826711-17
Part Number
90-10238051
c
d
e
a - Transom bolts (1/2 x 20) (4)
b - Flat washers - outer (4)
c - Nylon insert locknuts (4)
Outboard Transom Mounting Hardware - Supplied with Outboard
Part Name
Transom bolt
Nylon insert locknut
12-28421 Washer - inner
12-895062 Washer - outer
Part Name
10-814259 Transom bolt
10-67755-1 Transom bolt
10-67755-2 Transom bolt
CAUTION
!
b
a
d - Flat washers - inner (4)
e - Marine sealer - apply to shank of
bolts, not threads
1/2 x 20 x 5.50 in. long (3.25 in. thread)
1/2 x 20
0.516 in. ID x 1.50 in. OD
0.551 in. ID x 1.06 in. OD
Available Transom Mounting Bolts
1/2 x 20 x 4.00 in. long (2.25 in. thread)
1/2 x 20 x 4.50 in. long (2.25 in. thread)
1/2 x 20 x 6.50 in. long (2.75 in. thread)
200/225/250/275 VERADO 4-STROKE
5552
Description
Description
Page 9 / 51