Installing And Removing The Paddle Wheel; Wiring Connections - Mercury 200 VERADO Installation Manual

200/225/250/275 VERADO 4-STROKE
WITHOUT DRILLING HOLE THROUGH TRANSOM (OPTIONAL)
Route the cable over the transom or through a drain hole that is above the water line.

Installing and Removing the Paddle Wheel

Installation - Slide the pins into the slots in the bracket and snap the tabs into place.
Removal - squeeze open (unlock) the tabs and pull on the paddle wheel.
a

Wiring Connections

IMPORTANT: Before making wire connections, make sure wires are routed through the
transom.
Page 50 / 51
a
b
c
d
a - Splash well drain hole
b - Cable cap
c - Cable clamp
d - Paddle wheel assembly
e - Distance between first cable clamp and top of paddle wheel - 25.4 mm
(1.0 in.)
b
a - Tabs
e
ob01510
b - Pins
ob01511
90-10238051