Jackson Systems Comfort System T-32-P Operation Manual page 5

Press the PROG key again and the same day selected will be shown along with the number
which represents the second program event. The hour will flash indicating that this value can now be
programmed. Use the up ( ) or down ( ) key to advance the hour to the second event start time.
Make sure that the AM / PM is correct.
Press the PROG key again and the minutes will flash. Use the up ( ) or down ( ) key to set the
minutes for program
Press the PROG key again and the word
value. Use the up ( ) or down ( ) key to select the desired temperature to be maintained for the
program time period.
1 1 2
Press the PROG key again and the opposite mode and a temperature value will be displayed. Use
the up ( ) or down ( ) key to select the desired temperature to be maintained for the program
period.
Continue to press the
and . Once you have completed programming the number
1 1 4
the LCD will display the word
Option 1 - Copy Program
To copy all the values you have programmed to other days of the week, press the
up ( ) or down ( ) key and select each additional day you wish to duplicate the program. Press the
PROG key again and the word
programming steps will resume showing the next day to be programmed.
Option 2 - Different Daily Program
If you chose to have the next day represent a different program, simply press the
the word COPY appears and the
T-32-P will advance to the next day. Follow the same programming steps as the prior day. This
allows you to have a different schedule for each day of the week.
MODE O/RIDE
to start.
1 1 2
Heat
PROG key to advance through each programming step for program events
COPY . You now have two options.
COPY will flash briefly to confirm the copy process. Normal
COPY
PROG FAN
or Cool will be displayed along with the temperature
event, press the
1 1 4
Temporary Temperature Override
The T-32-P has a temporary program override function
that permits you to change the current event set
temperatures for a fixed period of time. The HVAC
installer will have set the override period from 1 to 12
hours. If during the override period another scheduled
event takes place, the override will be canceled.
To place the T-32-P in the temporary temperature
override mode, press the up ( ) or down ( ) key. The
LCD will show the word
( Heat or Cool ) Press the up ( ) or down ( ) key to
change the current temperature setting.
If the thermostat has been configured for auto-
changeover, wait 3 seconds after adjusting the first
mode ( Heat or Cool ) and the display will show the
next mode which can also be changed after which the
T-32-P will exit the override program.
PROG key again and
PROG key after
SET and the current mode.
,
1 1 2
time
1 1 2
1 1 3
4