Advertisement
Quick Links
Limit
STAT
TM
O
Model
LSL-HOB
Specifications
Compatible Equipment
Output Terminals
Fan Operation
Display
Control Power
Enclosure
Dimensions
Limited Warranty
Application
Limit Stat™ is designed to prevent the
user from adjusting the temperature
beyond a specific heating limit, thereby
greatly reducing utility bills.
This installation manual covers the
LSL-HOB single stage, heat only, battery
powered Limit Stat™.
Features
Digital, non-programmable
Battery powered only
Large illuminated display
Clean attractive design
Soft touch buttons
Easy installation
Adjustable heating setpoint limit
24 Volt heating only systems, single stage gas or oil
systems, 2-wire hydronic heating systems (hot water,
baseboard or radiator) and Millivolt systems
RH, W1
Not used
Green backlit LCD
2 AA alkaline batteries (Included)
Molded ABS plastic
3.25" x 5" x 1" (WHD)
1 Year
Installation Manual
Advertisement
Related Manuals for Jackson Systems Limit STAT
Summary of Contents for Jackson Systems Limit STAT
- Page 1 Limit Installation Manual STAT Application Limit Stat™ is designed to prevent the user from adjusting the temperature beyond a specific heating limit, thereby greatly reducing utility bills. This installation manual covers the LSL-HOB single stage, heat only, battery powered Limit Stat™.
- Page 2 When using the LSL-HOB battery powered is limited, affected by direct sunlight or other Limit Stat™, the batteries must be removed areas not typical of the temperature in the before changing any jumper settings. Wait at space.
- Page 3 This thermostat must be wired in accordance Temperature Change Buttons with all applicable local codes and ordinances. When the Limit Stat™ is in the HEAT mode, a The thermostat should be limited to a maximum of 1.5 amps. Higher current may single press on either the UP or DOWN button cause damage to the thermostat.
- Page 4 Setting the Heating Limit This manual is to be used by the installer only and contains information on setting the heating setpoint limit. Avoid leaving this installation manual with anyone who could compromise the settings. To set the Heating setpoint limit, place the MODE switch in the OFF position.