Non-Programmable Mode - Jackson Systems Comfort System T-32-P Operation Manual

Reviewing Set Temperatures
Your can review the set temperatures at any time by simply pressing the up ( ) or down
( ) key.
Advanced Fan Operation
In many commercial applications, code requires constant ventilation during occupied periods. The
HVAC installer can configure the T-32-P to allow the fan to run continuously during the
schedule. When the thermostat changes to the
operates with a heating or cooling call.
Factory Defaults
Default Schedule
Schedule
Start
Stop

Non-programmable Mode

Day
Cool
Heat
MODE O/RIDE
UP / DOWN
KEYS
FAN Selection
Press the FAN key to cycle through the fan selections. More details on fan functions can be found on
page 20 of this manual.
Auto The HVAC system fan will only run with a call for heating or cooling.
On The HVAC system fan will run continuously.
Setpoint (Mon - Sat
Start Time Heating
6:00 AM 70
6:00 PM 62
PROG FAN
PROG
KEY
STOP schedule, the fan shuts down and only
Setpoint (Sat - Sun)
Cooling Heating
75 62
83 62
MODE Selection
Press the MODE key to cycle through the modes of
operation and the LCD will display the following:
Heat Heat Mode
Cool Cool Mode
Auto Changeover (Installer
Cool
must activate this mode)
Heat
E. Heat Emergency heat when T-32-P is
configured for a heat pump system
OFF Thermostat is off
START
Cooling
83
83
8