Troubleshooting - Jackson Systems Comfort System T-32-P Operation Manual

Troubleshooting

LCD display is blank
Heating or cooling
system does not
respond
If for any reason your T-32-P does not function properly, contact your installing HVAC contractor.
• Check HVAC circuit breaker and reset if necessary.
• Make sure power switch at HVAC system is on.
• Make sure furnace door is closed securely.
• Press MODE key to set system to Heat. Make sure the
temperature is set higher than the inside temperature.
• Press MODE key to set system to Cool. Make sure the
temperature is set lower than the inside temperature.
• Check circuit breaker and reset if necessary
•Make sure power switch at HVAC system is on.
• Make sure furnace door is closed securely.
• If Heat or Cool is flashing, the T-32-P has initiated an equipment
protection time delay. Wait 4 minutes for the system to restart.
INDIANAPOLIS, IN 46203
www.jacksonsystems.com
06-1002-042210
12