Common Functions - Jackson Systems Comfort System T-32-P Operation Manual

Day
Cool
Heat
MODE O/RIDE
UP / DOWN
KEYS
Setting the temperatures
Press the up ( ) or down ( ) key for 3 seconds. The T-32-P will display the word
temperature setting for the current mode (
the setting. If Auto mode is selected (Shown by both
the heating temperature wait without touching a key for 3 seconds. The T-32-P will change to show
Cool and SET. Press the up ( ) or down ( ) key to change the temperature setting for cooling. Wait 3
seconds and the
T-32-P will automatically exit the menu. The new temperature settings will be maintained in memory.
Switching between day and night temperature settings
If the HVAC installer has set the
temperature settings. This provides a convenient method to manually select
(unoccupied) settings. To toggle between the
Day and Night temperature settings as previously described.
Reviewing Set Temperatures
You can review the set temperatures at any time by simply pressing the up ( ) or down ( ) key.

Common Functions

MODE Key
The MODE key is used to cycle through the available modes.
OFF
Heat
Cool
Heat / Cool (Auto)
E. Heat (emergency heat for heat pump systems only)
9
Setting the clock
The T-32-P has a real-time clock.
To set the clock, press the
flashes on the LCD. Use the up ( ) or down ( ) key to
set the current hour along with the AM and PM
symbol. Press the
flash. Use the up ( ) or down ( ) key to set the
current minutes. Press the
day flashes. Use the up ( ) or down ( ) key to set the
correct day of the week. Press the
exit the clock and day of week program.
FAN
PROG
PROG
KEY
Heat or
Day / Night function, the T-32-P will keep two heat and two cool
Day
PROG
Cool ). Press the up ( ) or down ( ) key to change
Heat and Cool on the display), after adjusting
and Night settings, press the
PROG key until the hour
key again until the minutes
PROG key again until the
PROG again to
SET and the
Day (occupied) or
PROG key. Set the
Night