BASIC FUNCTIONS
MODE CONFIGURATIONS
Your contractor can configure the thermostat with different mode selections based on
user preference and/or equipment type. Mode configuration can be as follows:
Conventional Heating and Cooling Equipment
Manual Changeover (
Heat / Cool / Off )
Auto Changeover
(Heat / Cool / Auto / Off )
Heat Only
(Heat / Off )
Cool Only
(Cool / Off )
Auto
(Auto / Off )
Heat Pump
Manual Changeover
(Heat / Cool / *E. Heat / Off )
Auto Changeover
(Heat / Cool / Auto / *E. Heat / Off )
Heat Only
(Heat / *E. Heat / Off )
Cool Only
(Cool / Off )
Auto
(Auto / *E. Heat / Off
* Only displayed if thermostat has been configured for auxiliary heat.
7