Vehicle 12V Bare Wire Adapter; Vehicle Cable Connection Cable (Fuse Not Shown) - Honeywell MX9 User Manual

Microsoft windows ce 5 operating system

Hide thumbs Also See for MX9:

Table of Contents

Vehicle 12V Bare Wire Adapter

Part Number: 9000A079CBL12ML3

Caution For proper and safe installation, the input power cable must be connected to a fused circuit on the vehicle. This

fused circuit requires a ten Amp maximum time delay (slow blow) high interrupting rating fuse. If the supply con-

nection is made directly to the battery, the fuse should be installed in the positive lead within 5 inches of the battery

positive (+) terminal. Note: For North America, a UL Listed fuse is to be used.

Caution

For installation by trained service personnel only.

Warning

Risk of ignition or explosion. Explosive gas mixture may be vented from battery. Work only in well ventilated area.

Avoid creating arcs and sparks at battery terminals.

1. To Vehicle Battery

2. To Vehicle Mounted Device

3. Green (GND)

4. Brown (DC+)

5. Blue (DC-)

6. 12VDC

3-8

Table of Contents