Advertisement
serving, as the unit could be very hot
Do not touch any wire during operation as high voltage might be causing electric shock.
Due to the magnifying type lens, please keep the lens out of contact with direct sunlight.
Direct sunlight can cause heat to build up inside of the unit, which will seriously damage
unit.
For power supply, do not connect in series much more than 4 units, use another
mains supply for next 4 units.
2. Technical Specifications
It can be operated by DMX512 control or can be used as an individual unit without
controller.
It can be linked together as many as required in master/slave mode, and perform the
great built-in programmed lighting shows triggered by music.
Please use a 3 pin XLR cable/plug when connecting them together.
It features different pre-programmed chase patterns.
3 Channel modes.
Voltage： AC 100-240V, 50/60Hz
LED: Total 1600pcs,
CW: 800pcs, WW: 800pcs
Power consumption：160W
Fuse: T 6.3A
Dimension： 540 x 556 x 115mm
Weight： 9.7KG
3. Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is
firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure
to which you are attaching the unit is secure and is able to support a weight of 10 times of
the unit's weight. Also always use a safety cable that can hold 12 times of the weight of the
unit when installing the fixture.
4A
Advertisement
