Table of Contents
Advertisement
3 − Preparation
Turning the power ON and OFF
Push the
switch on the front panel down to turn the
power ON.
The following Start Up screen appears.
To turn the power OFF, push the
front panel down again. A confirmation screen appears to
verify that you want to turn the power OFF. Follow the
instructions on the screen to turn the power OFF.
NOTE
When using an external DC power source or an internal
battery, a voltage of at least 11 V is necessary when starting
up.
20
TASCAM HS-P82
1 Press the
2 Touch the
switch on the
3 Touch the
4 Touch the item that you want to change, and use the
5 Touch the
After purchasing this unit, set the clock before making your
first recording. If you do not set the clock, the time stamps on
recording files will not be correct
Setting the time of the built-in clock
key on the front panel to open the
MENU
screen.
MENU
SYSTEM SETUP
screen.
SETUP
CLOCK ADJUST
you can set the built-in clock.
DATA
dial on the front panel to change the value.
button, or push the
SET
confirm the setting.
NOTE
button to open the
SYSTEM
tab to open the screen where
DATA
dial to
Advertisement
Table of Contents
