Wall Mounting - Panasonic KX-UTG 300B User Manual

4. Secure the Panasonic KX-UTA336 to the Panasonic KX-UTG 300B by inserting the 2 screws supplied with
the Panasonic KX-UTA336 into the rear of the Panasonic KX-UTG-300B (Figure 1-11).

Wall Mounting

NOTE: Make sure that the wall that the phone will be attached to is strong enough to support the phone. If not,
it is necessary for the wall to be reinforced. If you place the display face down when you attach the stand, be
sure to place a soft cloth under the display to avoid any damage.
1. Insert the five tabs of the wall-mounting adaptor into the designated openings in the base, and then
slide the wall-mounting adaptor in the direction of the arrow until it clicks (Figure 1-12).
Figure 1-11: Secure the sidecar
Figure 1-12: Attach wall mount
8 | P a g e
© Nextiva, All Rights Reserved