Panasonic KX-UTG 300B User Manual page 9

2. Fasten the wall-mounting adaptor to the base with 1 screw.
3. Connect the cables to the unit, and run the cables through the wall-mounting adaptor, as shown in
Figure 1-13.
NOTE: The cables can also be run from the bottom of the unit.
4. Drive the two screws into the wall 83 mm (3 and 1/4 in) or 100 mm (3 and 15/16 in) apart, and mount
the phone on the wall.
Figure 1-13: Run cables through wall mount
Figure 1-13: Hang on wall
9 | P a g e
© Nextiva, All Rights Reserved