Duplo DF-920 Maintenance Manual page 37

2-6-8. Checking the operations of the home sensor
Check that the home sensor turns ON and OFF properly
in the maintenance mode.
"3. MAINTENANCE MODE" in CHAPTER 2
See See
ELECTRICAL COMPONENTS
2-6-9. Fixed position of the switching adjusting plate of folding plate 2 folding stopper
Adjusting plate for setting the switching shaft to the regulated stopping position in single folding.
q Secure the switching adjusting plate at the position (7.0 mm (0.28")) shown in the figure while paying attention to
the left and right parallelity.
w Apply a very small amount of thread locking to the fixing screw of the switching adjusting plate.
(Loctite 242: Medium strength)
12H-M12M0-0309-0
1-35