Timer Controls: Number Of Shots - Vello shutterboss User Manual

TIMER CONTROLS: NUMBER OF SHOTS

Once you've set the Interval time under the
Timer Controls, you must tell the Wireless
ShutterBoss how many shots to trigger.
1. Turn on the receiver by pressing the
Power button until the display comes
on.
2. Set your camera exposure.
3: Use the arrow button on the transmitter
to select N under the Timer
Controls. Press the left and right
arrows until N is displayed.
4: Press the set button in the middle of
the arrow button to change the setting
for number of exposures. Use the up and
down arrows to change the number of
shots.
5: Press set button again to accept your
selection.
6: If this is the last of your Timer Control
settings, press Timer Start/Stop to
begin the exposure process.
19
TIMER CONTROLS CH
N
SHUTTER CONTROLS BATT