Table of Contents
Advertisement
NUMBER OF SHOTS
The ShutterBoss allows you to control the
number of shots taken in a sequence.
You can set the ShutterBoss to trigger the
camera shutter up to 399 times. Or you
can set it to take shots until you tell it to
stop. By default there will be a one second
interval between shots (see the previous
page).
1: After connecting the ShutterBoss to
your camera, adjust your camera
settings. Choose your focus mode and
set your exposure.
2: Make certain that the controls on the
ShutterBoss are not locked. If you see
the
displayed, press the
button until the lock icon disappears.
3: Use the arrow button to set the cursor
beneath No. Press the left and
SET
right arrows to move the cursor
into place.
4: Press the SET button to change the
number of shots. Use the up and down
arrows to change the value. To set the
number of shots to infinite, select "––,"
which is beyond 399 (or below 1).
5: Press SET again to accept your selection.
6: Press TIMER START/STOP to begin timer.
/ LOCK
SELF LONG INTV No. BEEP
cursor
number of shots
Advertisement
Table of Contents
