Care Of The Wireless Shutterboss; Liquid Crystal Displays - Vello shutterboss User Manual

CARE OF THE WIRELESS SHUTTERBOSS

Protect the Wireless ShutterBoss
Do not drop the devices. The units may
malfunction if subjected to a strong shock
or vibration.
Keep Dry
The devices are not waterproof. Avoid
getting the devices wet. Do not expose
them to high humidity.
Avoid Sudden Temperature Changes
Sudden changes in temperature, such as
entering or leaving a warm building on a cold
day, can cause damaging condensation inside
the devices. Protect the transmitter and
receiver by placing them inside a carrying
case or a sealed plastic bag and allowing them
to adjust to temperature changes gradually.
Avoid Magnetic Fields
Strong static charges or electromagnetic
elds generated by equipment such as radio
transmitters can interfere with the system.
A strong external static charge can cause
unusual characters to display on the screen
or may cause the device to malfunction.
In such a situation; turn off the camera,
disconnect all devices, remove the
batteries, and then replace them a few
seconds after the display goes out.
24

Liquid Crystal Displays

The display panel is a liquid crystal display.
At very low temperatures, the display
response my become slower. And at
temperatures higher than 60°C (140°F), the
display may darken. In either case, the
display will return to normal at room
temperature.