Number Of Shots - Vello shutterboss version ii User Manual

NUMBER OF SHOTS

The ShutterBoss allows you to control
the number of shots taken in a sequence.
You can set the ShutterBoss to trigger the
camera shutter up to 399 times. Or you can
set it to take shots until you tell it to stop.
By default there will be a one second interval
between shots (see the previous page).
1. After connecting the ShutterBoss to
your camera, adjust your camera settings.
Choose your focus mode and set your
exposure.
2. Make certain that the controls on the
ShutterBoss are not locked. If you see the
displayed, press the
until the lock icon disappears.
3. Use the arrow button to set the cursor
beneath No. Press the left and right
arrows to move the cursor into place.
4. Press the SET button to change the
number of shots. Use the up and down
arrows to change the value. To set the
number of shots to infinite, select "––,"
which is beyond 399 (or below 1).
5. Press SET again to accept your selection.
6. Press TIMER START/STOP to begin timer.
/Lock button
12
Cursor
SELF LONG INTV No. BEEP
Number Of Shots