Shutter Control: Continuous Shooting - Vello shutterboss User Manual

SHUTTER CONTROL: CONTINUOUS SHOOTING

Continuous shooting under the Shutter
Control settings will trigger the camera
shutter once every second. For exposures
longer than one second, use the Timer
Control settings described later in this manual.
1. Turn on the receiver by pressing and
holding the Power button.
2. Set your camera to single shot mode.
3: Use the arrow button on the transmitter to
select continuous shooting mode.
Press the left and right arrows until
the continuous shooting icon is
displayed at the bottom.
4. Press the transmitter's shutter release
button halfway to wake or focus your
camera (if set to Auto Focus). The LEDs
on the transmitter and receiver will both
turn green.
5. Fully depress and hold the shutter
release button on the transmitter. The
LEDs will turn red and the shutter will be
triggered. The LEDs will blink green and
red as shots are focused and triggered.
6. Release the shutter release button to
stop continuous shooting.
12
TIMER CONTROLS
SHUTTER CONTROLS
In continuous shooting mode, only the multiple
shot icon and the channel in use will display.
CH
BATT