Vello shutterboss User Manual page 17

TIMER CONTROLS: EXPOSURE LENGTH
Under Timer Controls, the Wireless
ShutterBoss can control shutter speeds that
are much longer than your camera offers, and
you don't have to manually end the exposure
as you do with the Shutter Controls.
1. Turn on the receiver by pressing the
Power button until the display comes on.
2. Set your camera to bulb exposure.
3: Use the arrow button on the transmitter
to select LONG under the Timer
Controls. Press the left and right
arrows until LONG is displayed at
the top of the LCD.
4: Press the set button in the middle of
the arrow button to change the Long
Exposure setting. Use the left and right
arrows to move between hours, minutes,
and seconds. Use the up and down
arrows to change the time values.
5: Press set button again to accept your
selection.
6: Continue on to other Timer Control
settings or press Timer Start/Stop to
begin the exposure process.
17
TIMER CONTROLS CH
LONG
SHUTTER CONTROLS BATT
hours minutes seconds