Drive Modes; Continuous Shots - Vello FreeWave Viewer VL User Manual

DRIVE MODES

Single Shots
1. Set your camera to Single shot
mode.
2. Press the Menu
the Receiver/Viewer followed by
the Set button to navigate
to the single shot icon [ ].
3. Half press the shutter button
on the Receiver/Viewer to
activate focusing. A green LED
will light up near the upper right
corner of the LCD.
4. Fully press the shutter button
Note: with some cameras you'll have to first manually focus the camera
and then use the receiver to remotely trigger the shutter.
20
to take the shot. The shutter
LED will turn red.
button on

Continuous Shots

1. Set your camera to Continuous
drive mode.
2. Press the Menu
the Receiver/Viewer to get to
Drive mode.
3. Press the Set
to highlight the continuous
shooting mode icon [ ] as seen
on the Receiver/Viewer screen.
4. Half press the shutter button
on the Receiver/Viewer to
activate focusing. A green LED
will light up near the upper right
corner of the LCD.
5. Fully press the shutter button.
button on The shutter LED will turn red.
button