Shutter Control: Single Shot - Vello shutterboss User Manual

SHUTTER CONTROL: SINGLE SHOT

1. Turn on the receiver by pressing and
holding the Power button until the
display comes on.
2. Set your camera to single shot mode.
3: Use the arrow button on the transmitter
to select single shot mode. Press
the left and right arrows until the
single shot icon is displayed in the
bottom left of the screen.
4. Press the transmitter's shutter release
button halfway to wake or focus your
camera (if set to Auto Focus). The LEDs
on the transmitter and receiver will both
turn green.
5. Fully depress the shutter release
button on the transmitter. The LEDs
will turn red and the shutter will be
triggered.
11
TIMER CONTROLS
SHUTTER CONTROLS
In single shot mode, only the single shot
icon and the channel in use will display.
CH
BATT