Powering Up; Turning On The Transmitter; Turning On The Receiver - Vello shutterboss User Manual

POWERING UP

Turning ON the Transmitter: The
Wireless ShutterBoss is optimized for
ultra-low power usage. Pressing any key will
wake the device. If no operation is
performed, the transmitter will revert to
standby status in one minute and the display
will turn off. The device will stay active
during timing operations and bulb
exposures longer than one minute.
Turning ON the Receiver: Press and
hold the power button for two seconds. The
display will show the channel in use. The
receiver turns off the same. Press and hold
the power button until the display goes off.
Press and hold the power button for
two seconds to power up the receiver.
The LED will blink green while the
device is on.
7