Timer Controls: Delay - Vello shutterboss User Manual

TIMER CONTROLS: DELAY

Under Timer Controls, the Wireless
ShutterBoss allows you set a delay of up to
99 hours 59 minutes 59 seconds.
1. Turn on the receiver by pressing and
holding the Power button until the
display comes on.
2. Make certain your camera is NOT also
set for a delay.
3: Use the arrow button on the transmitter
to select DELAY under the
Timer Controls. Press the left and
right arrows until DELAY is
displayed at the top of the LCD.
4: Press the set button in the middle of
the arrow button to change the Delay
setting. Use the left and right arrows
to move between hours, minutes, and
seconds. Use the up and down arrows
to change the time values.
5: Press set button again to accept your
selection.
6: Continue on to other Timer Control
settings or press Timer Start/Stop
to begin the delay timer.
16
TIMER CONTROLS
DELAY
SHUTTER CONTROLS
hours minutes seconds
CH
BATT