Shutter Control: Delay - Vello shutterboss User Manual

SHUTTER CONTROL: DELAY

The Delay feature in the Shutter Controls
gives you simple control over delay and
number of shots. To combine delay with other
exposure settings, use the Timer Control
settings described later in this manual.
1. Turn on the receiver by pressing and
holding the Power button.
2. Set your camera to single shot mode.
3: Use the arrow button on the transmitter
to select delay shooting mode.
Press the left and right arrows
until the delay icon is displayed at
the bottom of the LCD.
4. Press the set button in the middle of
the arrow button to change the settings.
5. Press the up and down arrows to set the
number of exposures (from 1 to 99 shots,
or set the device to take an unlimited
number of Photos when set to "--".).
6. Press the right arrow to set the delay
time (from 1 to 59 seconds).
7. Press the set button in the middle of
the arrow button to lock your settings.
8. Press the transmitter's shutter release
button halfway to wake or focus the
camera. Fully depress the shutter release
button. The delay countdown will begin
and one shot will be taken per second.
14
TIMER CONTROLS
SHUTTER CONTROLS
number of shots seconds of delay
CH
BATT