Oscilloscope Function - Siemens AT 18 Operating Instructions Manual

Rev.01 Issue 09/05
WARNING
After changing the profile it is necessary to start a new learn run (start with S5000 ).
Otherwise the closing speed and nudging speed can't be limited by the door mass and
the kinetic energy could be exceeded the permitted value.
14.12.3

Oscilloscope function

Figure 15
With the help of the oscilloscope function it is possible to record the door speed and the
travel distance in a 60 second time window (single recording) or sequentially (continuous
recording).
With the zoom function a range of the time axis in the large diagram window can be
expanded. For this the desired range is entered in the "Zoom" field or selected through a
mouse click in the recording window on the range which is to be expanded.
With the left mouse button you enter the starting point and with the right mouse button
the end point of the zoom range. The selected area is indicated by a brighter
background colour and expanded in the large window.
Under Menu = > Settings the scale can be adjusted for the path and the recorded
speeds.
Over the "Save Zoom Data" button you can save the measurement values obtained in a
file (CSV format).
To return to the FrontEndPC main menu use the "Main Menu" button.
44 Operating instructions AT18 SEDM