Siemens AT 18 Operating Instructions Manual page 39

QUICK SETUP
Door state
Select profile
Door commands
Parameter setup
38
Rev.01
state = ...
position = ...cm
profile 0...4
Stop door
Open door
Close door
Close with nudging
Closing forces
All closingforces ...N
Max. speed open
Max. speed open ...m/s
Max. speed close
Max. speed close ...m/s
All slow speeds
All slow speeds ...m/s
Slow start distance
All low start distances ...mm
Slow end distance
All slow end distances ...mm
All ramps
All ramps ...mm/s²
Operating instructions AT18 SEDM
Issue 09/05