List The Current Settings - Metapace S-2 Hardware Manual

LIST THE CURRENT SETTINGS

The current settings of all scanner parameters can be sent to the host computer for user
inspection. The listing includes pages as shown below. You can select the page of interest
by having the scanner read the "List Page x" label. The scanner will respond with two
beeps (low-high tone) and send the selected page to the host immediately.
List Page 1
List Page 2
List Page 3
List Page 4
List Page 5
List Page 6
List Page 7
List settings regarding Firmware Version,
Serial Number, Interface, Buzzer, and Other
Scanner Parameters
List settings regarding Prefix, Suffix, and
Length Code Setting
List settings regarding Code ID
List settings
Symbologies
List settings regarding Symbology Parameters
(1/3)
List settings regarding Symbology Parameters
(2/3)
List settings regarding Symbology Parameters
(3/3)
Update
Quick Start
regarding: Readable
17