Activating Editing Formats; Activate Editing Formats - Metapace S-2 Hardware Manual

Metapace S-2 Hardware Manual

6.1 ACTIVATING EDITING FORMATS

6.1.1 ACTIVATE EDITING FORMATS

If you have already configured any editing format before, you may directly apply the
editing format. If not, you must start with configuring an editing format first, and then,
activate the editing format when it is desired in use.
Editing Format 1
Enable Format 1
Editing Format 2
Enable Format 2
Editing Format 3
Enable Format 3
160
End Programming Format
*Disable Format 1
*Disable Format 2
*Disable Format 3