Configuring Format - Define Data Field; Start Position; Field Adjustment - Metapace S-2 Hardware Manual

6.4 CONFIGURING FORMAT — DEFINE DATA FIELD

6.4.1 START POSITION

Data can be divided into fields in one of the following direction –
from head (F1) to tail (F5)
from tail (F1) to head (F5)
*From Head

6.4.2 FIELD ADJUSTMENT

You may apply equal length to all fields, if necessary. It will add "Space" (0x20) to field
when data is found shorter than specified.
*No Adjustment
1) Read the label above to adjust field by length.
2) Read the "
Decimal Value
3) Read the "Validate" label on the same page to complete this setting.
" label on page 195 for the desired field length.
Chapter 6 Applying Formats for Data Editing
Set Length to adjust
Update
From Tail
fields ... (*0)
171